# Network and Time Configuration

Correct IP and time configuration are mandatory prerequisites for a compliant Timestamping Authority (TSA) deployment.

# 1. Overview

SmartTSA provides dedicated administrative sections for:

- Network configuration (IP settings)
- Time synchronization configuration (NTP servers)


These configurations are typically performed:

- During initial setup
- Before enabling timestamping services
- Whenever network or infrastructure changes occur


# 2. IP Configuration

## 2.1 Purpose

The IP configuration section allows administrators to define all network parameters required for the SmartTSA appliance to operate correctly.

Proper network configuration ensures:

- Appliance reachability
- Cluster connectivity (in HA environments)
- Secure administrative access
- Correct client communication


## 2.2 Accessing IP Configuration Menu

To configure network settings:

1. Log in to the SmartTSA Administrative Console
2. From the left navigation menu, select:


```
IP configuration
```

The administrator can then set all required network parameters.

## 2.3 Typical Parameters

Although specific fields may depend on deployment, network parameters generally include:

- Appliance IP address
- Netmask
- Default gateway
- DNS servers
- Cluster-related addresses (if HA enabled)


⚠️ Incorrect IP configuration may prevent access to the appliance.

# 3. Time Configuration (NTP)

## 3.1 Importance of Accurate Time

Accurate time is essential for a Timestamping Authority.

All timestamps issued by SmartTSA must rely on:

- Trusted and synchronized system time
- Minimal deviation from official time sources


Failure in time synchronization may cause:

- Invalid timestamps
- Compliance violations
- Audit issues


## 3.2 NTP Configuration Overview

SmartTSA supports configuration of one or more NTP servers.

NTP servers are used to:

- Synchronize appliance clock
- Reduce time drift
- Guarantee timestamp accuracy


## 3.3 Accessing Time Configuration Menu

To manage NTP servers:

1. Log in to the Administrative Console
2. Select the menu option:


```
Time Configuration
```

A list of configured NTP servers is displayed.

## 3.4 Managing NTP Server List

From the Time Configuration page, administrators can:

- Add a new NTP server
- Remove an existing NTP server
- Review the current synchronization status


Best practice is to configure multiple redundant NTP sources.

Example:

- ntp1.company.local
- ntp2.company.local
- pool.ntp.org (only if allowed by policy)


## 3.5 Operational Recommendations

To ensure correct time synchronization:

- Use trusted internal or certified time sources
- Configure at least two NTP servers for redundancy
- Monitor estimated synchronization error regularly
- Avoid using unreliable public servers in regulated environments


# 4. Troubleshooting Notes

If NTP synchronization fails:

- Verify network connectivity to the NTP servers
- Ensure firewall rules allow NTP traffic (UDP port 123)
- Check that server addresses are correct
- Review dashboard NTP status indicators


# 5. Best Practices Summary

Before enabling TSA services, confirm:

- Network settings are correct and documented
- Appliance is reachable via IP/DNS
- NTP servers are configured and operational
- Time deviation is within acceptable limits